How to Fix Delta Force "Anti-Cheat Not Installed" (ACE) – 2026

8 min to read

How to Fix Delta Force "Anti-Cheat Not Installed" (ACE) – 2026

"Anti-Cheat Not Installed" in Delta Force means the ACE anti-cheat is missing or damaged, or its checks for TPM 2.0 and Secure Boot failed. Run ACE-Setup64.exe from the game folder as administrator, verify the game files, and make sure TPM 2.0 and Secure Boot are on.

Delta Force: Anti-Cheat Not Installed

Anti-Cheat Not Installed
ACE (Anti-Cheat Expert): Delta Force: Anti-Cheat Not Installed

What causes Delta Force: Anti-Cheat Not Installed

ACE installs with the game. It goes missing when an antivirus removed it, the setup was blocked, or the game was copied. Since its Security Brief Vol. 3, Delta Force also checks TPM 2.0 and Secure Boot when you enter the lobby, which can show up as an anti-cheat error.

How to fix Delta Force: Anti-Cheat Not Installed in Windows

1

Reinstall ACE

Open the Delta Force install folder, then Binaries\Win64\AntiCheatExpert, and run ACE-Setup64.exe as administrator. If that folder is missing, verify the game files in your launcher (Steam or the Delta Force launcher). Restart the PC afterwards.
2

Set the ACE services to Automatic

Press Win + R, type services.msc. Find AntiCheatExpert Service and AntiCheatExpert Protection, set Startup type to Automatic and click Start on each. Then restart the PC and the game.
3

Check your TPM

Press Win + R, type tpm.msc and press Enter. The TPM is ready for use with Specification Version 2.0 is what you want. Compatible TPM cannot be found means the firmware TPM is switched off in the BIOS. Almost every AMD Ryzen CPU (fTPM) and Intel CPU of the last years (PTT) has one built in.
4

Check how your PC starts

Press Win + R, type msinfo32 and press Enter. In System Summary look at BIOS Mode and Secure Boot State. BIOS Mode UEFI is what you want. Legacy means your PC starts in the old mode, and Secure Boot cannot be turned on until the disk is converted (next step).
5

Suspend BitLocker first (if it is on)

Changing TPM, Secure Boot or boot settings can make BitLocker ask for its 48-digit recovery key at the next start. Open Start, type Manage BitLocker and, if drive C: shows BitLocker on, click Suspend protection. On Windows Home look under Settings > Privacy & security > Device encryption. Or run this in Terminal (Admin): manage-bde -protectors -disable C: -RebootCount 2. It turns itself back on after two restarts. Check that you can see your recovery key at aka.ms/myrecoverykey before you go on.
6

Only if BIOS Mode says Legacy: convert the disk to GPT

Secure Boot needs UEFI, and UEFI needs a GPT disk. Windows has a Microsoft tool for this that keeps your files. Back up anything important first, then in Terminal (Admin) run mbr2gpt /validate /allowFullOS. If it says validation completed successfully, run mbr2gpt /convert /allowFullOS. From now on the PC can only start in UEFI mode, so turn CSM off in the BIOS right away (BIOS steps below), or Windows will not start.

How to fix it in the BIOS

This part happens in your PC's firmware setup (the BIOS), so open this page on your phone first. Menu names change a little between BIOS versions: if a path below does not match, look for the words in bold. Only if tpm.msc or msinfo32 showed TPM or Secure Boot off.

1

Restart into the BIOS

Open Settings > System > Recovery, click Restart now next to Advanced startup, then Troubleshoot > Advanced options > UEFI Firmware Settings > Restart. Or run shutdown /r /fw /t 0 in Terminal (Admin). You can also press Del right after switching the PC on (desktops; F2 on many laptops and some ASRock and MSI boards).
2

Change these settings

  • Turn on the firmware TPM: AMD fTPM (often Firmware TPM) on AMD, Intel PTT (Platform Trust Technology) on Intel.
  • Turn CSM (Compatibility Support Module, Legacy boot) off so the PC starts in UEFI mode. Only when msinfo32 shows BIOS Mode UEFI or after the GPT conversion above, or Windows will not start.
  • Turn on Secure Boot and install the default keys (Install default Secure Boot keys or Restore Factory Keys). Secure Boot mode Standard, OS type Windows UEFI mode.

Where to find them on your board:

ASUS

Press F7 for Advanced Mode.
TPM 2.0 (AMD fTPM / Intel PTT): Advanced > AMD fTPM configuration > Firmware TPM (AMD), or Advanced > PCH-FW Configuration > PTT (Intel)
CSM off (UEFI only): Boot > CSM > Launch CSM: Disabled
Secure Boot: Boot > Secure Boot > OS Type: Windows UEFI mode, then Key Management > Install Default Secure Boot keys

MSI

Press F7 for Advanced mode.
TPM 2.0 (AMD fTPM / Intel PTT): Settings > Security > Trusted Computing > Security Device Support: Enable, then AMD CPU fTPM or Intel PTT
CSM off (UEFI only): Settings > Advanced > Windows OS Configuration > BIOS UEFI/CSM Mode: UEFI (on some boards: Windows 10/11 WHQL Support: Enabled)
Secure Boot: Settings > Advanced > Windows OS Configuration > Secure Boot: Enabled, Secure Boot Mode: Standard

Gigabyte (AORUS)

Press F2 to switch to Advanced Mode.
TPM 2.0 (AMD fTPM / Intel PTT): Settings > Miscellaneous > AMD CPU fTPM (AMD) or Intel Platform Trust Technology (PTT) (Intel)
CSM off (UEFI only): Boot > CSM Support: Disabled
Secure Boot: Boot > Secure Boot: Enabled, Secure Boot Mode: Standard (or Restore Factory Keys)

ASRock

Press F6 to switch to Advanced Mode.
TPM 2.0 (AMD fTPM / Intel PTT): Advanced > CPU Configuration > AMD fTPM switch (AMD), or Security > Intel Platform Trust Technology (Intel)
CSM off (UEFI only): Boot > CSM (Compatibility Support Module): Disabled
Secure Boot: Security > Secure Boot: Enabled, then Install Default Secure Boot Keys

Laptops and prebuilt PCs

Dell: F2, Boot Configuration > Secure Boot, Security > TPM 2.0 Security On, Virtualization Support > VT / VT-d.
HP: Esc then F10, Advanced > Secure Boot Configuration, Security > TPM Embedded Security, Advanced > System Options > Virtualization Technology.
Lenovo: F1 on ThinkPad, F2 or the Novo button on IdeaPad and Legion, Security > Secure Boot, Security > Security Chip, Security > Virtualization.
ASUS: F2, Security > Secure Boot Control, Advanced > Trusted Computing.
Acer: F2, set a Supervisor password first or Secure Boot stays greyed out, then Boot > Secure Boot and Security > TPM.
MSI: Del, Security > Secure Boot, Advanced > Trusted Computing.
Gigabyte / AORUS: F2, Security > Secure Boot, Advanced > Trusted Computing.
3

Save and restart

Press F10 and confirm with Yes. Windows starts normally. If the PC does not start after turning CSM off, go back into the BIOS and turn CSM on again: the disk still needs the GPT conversion.

Fix it in one click with RIP Tweaks (free)

RIP Tweaks 6.9.3 has a free anti-cheat error fixer. Open Fixes, then Anti-cheat errors, and paste Delta Force: Anti-Cheat Not Installed or pick your game. The app first checks what your PC has right now (for example Secure Boot: Off, TPM: On) and shows only the steps still missing.

The anti-cheat error fixer in RIP Tweaks

It fixes the Windows side itself

Memory integrity, the Windows hypervisor, test signing, Control Flow Guard, the vulnerable driver blocklist and services that an optimizer switched off: the app changes them for you, saves what it changed first, and can put every change back.

It takes you into the BIOS with the right card

What only the BIOS can change (TPM, Secure Boot, CSM, virtualization, IOMMU), the app shows for your exact board maker, suspends BitLocker for you and restarts straight into the BIOS. A QR code opens this page on your phone.

It checks again after the restart

Back in Windows, the fixer checks again and shows green, or exactly what is still missing.

The fixer is free in every plan, also without an account. Download RIP Tweaks (free)

Check that it worked

In services.msc the AntiCheatExpert services run, and Delta Force reaches the lobby.

Frequently asked questions

Does Delta Force need TPM 2.0 and Secure Boot?

Yes. According to its Security Brief Vol. 3 (19 December 2025), the game checks both once when you enter the lobby.

Where is ACE-Setup64.exe?

In the Delta Force install folder under Binaries\Win64\AntiCheatExpert.

How do I know if my PC has TPM 2.0?

Press Win + R, type tpm.msc and press Enter. If it says the TPM is ready for use and Specification Version is 2.0, you have it. If it says no compatible TPM was found, the firmware TPM is usually just switched off in the BIOS.

Is it safe to turn on Secure Boot?

Yes. Secure Boot is a standard UEFI feature that only lets signed boot software start. Windows 11 PCs ship with it on, and turning it on does not touch your files, games or settings.

Can changing these settings get me banned?

No. These are the anti-cheat's own requirements, and the publisher asks you to change them. Bans come from cheats and tools that tamper with the game, never from turning on Windows security features.

Sources

All anti-cheat errors: Anti-Cheat Error Fixes. Related: How to Fix "ACE Center Exception" in Delta Force – 2026 and How to Fix Delta Force Lobby Kick (TPM 2.0 and Secure Boot Check) – 2026.