How to Fix VAN 9090 (TPM 2.0 Failed to Initialize) – 2026

7 min to read

How to Fix VAN 9090 (TPM 2.0 Failed to Initialize) – 2026

VAN 9090 means Windows has a TPM, but it did not start properly, so Vanguard cannot use it. Usually the TPM was cleared, reset by a BIOS update, or has a firmware bug. Restart the PC first. If it stays, switch the firmware TPM off and on again in the BIOS, update the BIOS, and only then clear the TPM in Windows.

VAN 9090

TPM 2.0 failed to initialize
Riot Vanguard: VAN 9090

What causes VAN 9090

The TPM has to be set up (provisioned) by Windows before apps can use it. That breaks when the TPM was cleared, when a BIOS update or CMOS reset re-created it, when you swapped the CPU (the firmware TPM lives in the CPU), or when older AMD fTPM firmware has known bugs that a BIOS update fixes.

How to fix VAN 9090 in Windows

1

Restart the PC (a real restart)

Use Start > Power > Restart, not Shut down: with Fast Startup on, Shut down keeps parts of Windows loaded. A restart clears drivers stuck in memory, which fixes this error more often than anything else.
2

Check your TPM

Press Win + R, type tpm.msc and press Enter. The TPM is ready for use with Specification Version 2.0 is what you want. Compatible TPM cannot be found means the firmware TPM is switched off in the BIOS. Almost every AMD Ryzen CPU (fTPM) and Intel CPU of the last years (PTT) has one built in.
3

Install every Windows update

Open Settings > Windows Update, click Check for updates and install everything, restart, then check again until nothing is left. If updates are blocked or paused (some optimizers do that), turn the block off first. Anti-cheats need recent security updates and current root certificates.
4

Suspend BitLocker first (if it is on)

Changing TPM, Secure Boot or boot settings can make BitLocker ask for its 48-digit recovery key at the next start. Open Start, type Manage BitLocker and, if drive C: shows BitLocker on, click Suspend protection. On Windows Home look under Settings > Privacy & security > Device encryption. Or run this in Terminal (Admin): manage-bde -protectors -disable C: -RebootCount 2. It turns itself back on after two restarts. Check that you can see your recovery key at aka.ms/myrecoverykey before you go on.

How to fix it in the BIOS

This part happens in your PC's firmware setup (the BIOS), so open this page on your phone first. Menu names change a little between BIOS versions: if a path below does not match, look for the words in bold.

1

Restart into the BIOS

Open Settings > System > Recovery, click Restart now next to Advanced startup, then Troubleshoot > Advanced options > UEFI Firmware Settings > Restart. Or run shutdown /r /fw /t 0 in Terminal (Admin). You can also press Del right after switching the PC on (desktops; F2 on many laptops and some ASRock and MSI boards).
2

Update the BIOS

Download the newest BIOS for your exact board or laptop model from the maker's support page and flash it with the board's own tool from inside the BIOS (ASUS EZ Flash, MSI M-Flash, Gigabyte Q-Flash, ASRock Instant Flash; laptops: the maker's updater). Never switch the PC off while it flashes. A BIOS update often resets settings, so check TPM and Secure Boot again afterwards. The PC restarts after flashing: open the BIOS again for the next step.
3

Change these settings

  • Switch the firmware TPM (fTPM or PTT) off, save and restart into the BIOS again, then switch it on again and save. This re-creates the TPM without clearing it from Windows.

Where to find them on your board:

ASUS

Press F7 for Advanced Mode.
Firmware TPM off and on again: Advanced > AMD fTPM configuration > Firmware TPM (AMD), or Advanced > PCH-FW Configuration > PTT (Intel)

MSI

Press F7 for Advanced mode.
Firmware TPM off and on again: Settings > Security > Trusted Computing > Security Device Support: Enable, then AMD CPU fTPM or Intel PTT

Gigabyte (AORUS)

Press F2 to switch to Advanced Mode.
Firmware TPM off and on again: Settings > Miscellaneous > AMD CPU fTPM (AMD) or Intel Platform Trust Technology (PTT) (Intel)

ASRock

Press F6 to switch to Advanced Mode.
Firmware TPM off and on again: Advanced > CPU Configuration > AMD fTPM switch (AMD), or Security > Intel Platform Trust Technology (Intel)

Laptops and prebuilt PCs

Dell: F2, Boot Configuration > Secure Boot, Security > TPM 2.0 Security On, Virtualization Support > VT / VT-d.
HP: Esc then F10, Advanced > Secure Boot Configuration, Security > TPM Embedded Security, Advanced > System Options > Virtualization Technology.
Lenovo: F1 on ThinkPad, F2 or the Novo button on IdeaPad and Legion, Security > Secure Boot, Security > Security Chip, Security > Virtualization.
ASUS: F2, Security > Secure Boot Control, Advanced > Trusted Computing.
Acer: F2, set a Supervisor password first or Secure Boot stays greyed out, then Boot > Secure Boot and Security > TPM.
MSI: Del, Security > Secure Boot, Advanced > Trusted Computing.
Gigabyte / AORUS: F2, Security > Secure Boot, Advanced > Trusted Computing.
4

Save and restart

Press F10 and confirm with Yes. Windows starts normally.

If it still does not work

1

Clear the TPM (last resort)

Only if nothing else works: open tpm.msc and choose Clear TPM, then confirm at the restart. Suspend BitLocker first and know your recovery key. Clearing the TPM removes your Windows Hello PIN and keys stored in the TPM, so you set the PIN up again afterwards.
2

Contact Riot Support

If none of this helps, open a ticket with Riot Support. Riot's Repair Tool (on the ticket page) collects the logs they ask for.

Fix it in one click with RIP Tweaks (free)

RIP Tweaks 6.9.3 has a free anti-cheat error fixer. Open Fixes, then Anti-cheat errors, and paste VAN 9090 or pick your game. The app first checks what your PC has right now (for example Secure Boot: Off, TPM: On) and shows only the steps still missing.

The anti-cheat error fixer in RIP Tweaks

It fixes the Windows side itself

Memory integrity, the Windows hypervisor, test signing, Control Flow Guard, the vulnerable driver blocklist and services that an optimizer switched off: the app changes them for you, saves what it changed first, and can put every change back.

It takes you into the BIOS with the right card

What only the BIOS can change (TPM, Secure Boot, CSM, virtualization, IOMMU), the app shows for your exact board maker, suspends BitLocker for you and restarts straight into the BIOS. A QR code opens this page on your phone.

It checks again after the restart

Back in Windows, the fixer checks again and shows green, or exactly what is still missing.

The fixer is free in every plan, also without an account. Download RIP Tweaks (free)

Check that it worked

tpm.msc should say The TPM is ready for use. Start the Riot Client.

Frequently asked questions

I just changed my CPU. Is that why?

Yes, very likely. The firmware TPM is part of the CPU, so a new CPU means a new, empty TPM. Windows sets it up again after a restart or two; clearing it in tpm.msc speeds that up.

Will clearing the TPM delete my files?

No, but it deletes keys stored in the TPM: your Windows Hello PIN has to be set up again and BitLocker asks for its recovery key if you did not suspend it first.

Does turning on TPM delete anything?

No. Switching the firmware TPM on does not touch your files. Only clearing an existing TPM removes things stored in it, like the Windows Hello PIN and BitLocker keys, which is why you suspend BitLocker first.

My settings were gone after a BIOS update. Is that normal?

Yes. BIOS updates often reset every setting to the default, and on some boards that turns fTPM, Secure Boot or virtualization off again. Check them again after every BIOS update.

Can changing these settings get me banned?

No. These are the anti-cheat's own requirements, and the publisher asks you to change them. Bans come from cheats and tools that tamper with the game, never from turning on Windows security features.

Sources

All anti-cheat errors: Anti-Cheat Error Fixes. Related: How to Fix VAN 9001 in Valorant (TPM 2.0 and Secure Boot) – 2026 and How to Fix VAN 9101 (Attestation Failure) – 2026.